Skip to product information
1 of 5


Diver-X ContactGlove rev.2 + Magnetra (Global Shipping)

Diver-X ContactGlove rev.2 + Magnetra (Global Shipping)

Regular price $533.00 USD
Regular price Sale price $533.00 USD
Sale Sold out
Shipping calculated at checkout.


ContactGlove rev.2

This is the successor model of ContactGlove rev.1.


  • ContactGlove (both hands)
  • USB dongle for communication
  • Universal mounting adapter (for vive tracker + for tundra tracker)
  • Carrying case
  • Charging USB cable x2
  • Diving Station (Download)
  • Injection prevention parts

The product image shows ContactGlove + Magnetra add-on.

About size

Please refer to this sheet for selection. Please note that returns cannot be made due to size differences. (You can change the size later by purchasing a replacement glove of a different size separately.)

Size sheet (PDF)

Additional size information


battery capacity 1,800mAh
Continuous operation time Approximately 12 hours (built-in battery)
charging time Approximately 3 hours (when power is OFF)
Charging method USB Type-C terminal
hand tracking Independent bending acquisition of each finger/joint
haptic feedback
Haptic reactor installed in the main body
Wireless communication Unique communication using 2.4GHz band
controller input

Trigger, grip, touchpad (emulation)

In order to use A, B, System, and Joystick, you will need to purchase a button/joystick module or Magnetra (sold separately).

Compatible VR headsets Various headsets compatible with SteamVR *Operation is not guaranteed with all headsets.
Compatible applications
VRChat, Neos VR, and other SteamVR applications (in order to use hand tracking, the content must support Skeletal Input. As of April 2023, VRChat does not support Skeletal Input, but our Hand tracking can be enabled using proprietary software developed by
*Operation is not guaranteed with all SteamVR applications.
tracking Separate installation of various trackers compatible with the LightHouse tracking system is required.

Click here for detailed product specifications.

[When using for motion capture purposes]
If you only want to use the hand tracking function, there is usually no need to purchase a button module, etc.

[When used in conjunction with mocopi]
Please take a look at the campaign page below and refer to our document .

[When using controller input (buttons/joystick)]
You can use either of the options below, please purchase the module separately.

① Button/joystick module
Button module , Joystick module
② Magnetra (new interface module)

[If using the LightHouse tracking system]
You must use the following two devices that are compatible with the LightHouse tracking system to obtain the location of your ContactGlove.
If you do not have the following devices, please purchase them separately.

・SteamVR Base Station 2.0 (1.0)
・Compatible trackers x2 (Tundra Tracker, VIVE Tracker (3.0), VIVE Tracker 2018, etc.)

*An adapter for compatible trackers is included with ContactGlove rev.2.
*The above two devices are third-party products.Please refer to the product pages of various devices and compatible HMDs before use.

* When using an HMD that is not compatible with LightHouse (Quest 2, etc.) under the above environment
It is necessary to introduce OpenVR-SpaceCalibrator (external link) to SteamVR and match the space of the LightHouse tracking system to the space on the HMD side.

[When using in a non-LightHouse environment using Quest2]
Get ContactGlove position with Quest2 controller instead of compatible tracker.
Please purchase the adapter separately.


This is an upgrade module that can greatly improve the operability of ContactGlove. This is an exoskeleton controller module that connects to the expansion terminal on the main unit and is fixed to the glove using magnets. High operability can be achieved while maintaining the immersive feeling unique to gloves. In addition, the hinge can be rotated in 3 stages, freeing your hands. (The image is of a prototype. The mass-produced version will be black.)


  • Magnetra (for both hands)
  • TRRS cable for connection (for both hands: length 150mm)
  • Fixing screws: 12 total (6 for right hand (3 sizes), 6 for left hand (3 sizes))
  • Spacers: 4 total (2 for right hand, 2 for left hand)

About size

Magnetra is designed to be used by people of various hand sizes by adjusting the length of the hinge using the included spacer and changing the position of the internal magnet. Can be attached to existing S/M/L sizes and all ContactGloves.


compatibility ContactGlove rev.1 / rev.2 Firmware ver1.5 or higher (coming soon)
power supply Power supply using TRRS cable from ContactGlove main unit
communication Wired communication with the ContactGlove unit using a TRRS cable.Uses the extension terminal on the front.
controller input Magnetra:A/B/System/Joystick
ContactGlove body: Trigger/Grip/TouchPad(emulation)
Compatible applications All SteamVR content such as VRChat, Resonite, etc.
Compatible tracker TundraTracker, all VIVE Trackers

About delivery time

This product is a pre-order item.

Product shipping is scheduled for Feb 24 2024.

If there is a possibility that there will be a change in the shipping time, we will promptly notify the purchaser via email.

Please note that if you purchase this product and another product together, the shipping time will be the same as this product (or the later product). If you would like the items to be shipped separately, please place separate orders.


  • In order to use Magnetra, it is necessary to apply firmware updates and DivingStation updates that will be released before shipping this product.
  • Magnetra components contain powerful magnets. We take great care in assembling the product, but please be careful if you have small children who may be at risk of swallowing it accidentally.
  • A Phillips screwdriver is required for installation.
  • It can coexist with existing button/joystick modules, but Magnetra input takes precedence while Magnetra is activated.

About warranty

The warranty is valid for one year after the product is shipped.

We will repair or replace any defects caused by our design or manufacturing, or any other defects that are thought to have occurred due to our negligence, free of charge. As specified in the warranty terms, we may charge repair costs for defects or damage that are considered to be caused by user negligence.

*Images are from the time of development. The appearance of the product may differ from the actual product shipped.

EOZ is committed to quality and comfort for all our products. We strive to be the leader in full body tracking straps and accessories within the VR Community and beyond. If you are not satisfied with any of our products, please get in touch with us immediately!

View full details